(side view)
Rubber seal for most fiberglass toppers with
aluminum framed rear doors
Topper Door Seal - Single Leaf
(side view)
Description: Rubber seal for most aluminum toppers with
aluminum framed rear doors
Black
1" wide
Sold in 6 foot sections
Price: each 6 foot section Quantity:
Topper Door Seal - Double Leaf
- With Bulb
(side view) Rubber seal for most fiberglass toppers with
aluminum framed rear doors
Black
1 5/8" wide
Bulb for extra seal
Sold in 6 foot sections
Price: each 6 foot sectionQuantity:
REAR
DOOR ROD ASSEMBLY
Truck Cap Rear Door Rod Assembly/Lock
Bars
(picture of actual item) Rod Assembly for most fiberglass and aluminum
truck caps with a single t-handle
silver
available in 5 standard sizes (54", 61", 65",
66", & 72")
can cut to fit if necessary
no other hardware included
Price: eachQuantity:
Length :
Select Length Here
54 Inch Rod Assembly / LB54
61 Inch Rod Assembly / LB61
65 Inch Rod Assembly / LB65
66 Inch Rod Assembly / LB66
72 Inch Rod Assembly / LB72
Topper Door Seal - Double Leaf -
With Bulb
(side view) Rubber shroud for covering cables on fiberglass
toppers with all glass rear doors. The Leer 100 XL and 100 XQ
use this shroud.
Black
approx. 15" long by 2" wide
Adheres with 3M automotive tape
Price: eachQuantity:
GAS
PROP BALL MOUNTS
Topper Door - Ball Mount for Gas
Props/Lift Cylinders
Description: Ball Mount with 5 holes - Bent
Steel
10 mm Ball
Typically used on the inside of the topper door
Price: each Quantity:
Topper Door - Ball Mount for Gas
Props/Lift Cylinders
Description: Ball Mount with 5 holes - Bent - Reversed
Steel
10 mm Ball
Typically used on the bottom side of tonneau covers
Reversed
Price: each Quantity:
Topper Door - Ball Mount for Gas
Props/Lift Cylinders
(picture of actual item)
Description: Ball Mount with 5 holes - Flat
Steel
10 mm Ball
Typically used on the truck bed rails with a tonneau covers
Price: each Quantity:
Topper Door - Ball Mount for Gas
Props/Lift Cylinders
Description: Ball Mount with 7 holes - Bent
Steel
10 mm Ball
Typically used on the truck bed rails with a tonneau covers
Price: each Quantity:
Topper Door - Ball Mount for Gas
Props/Lift Cylinders
(picture of actual item)
Description: Ball Mount with 3 holes - Double Bent
Steel
10 mm Ball
Typically used on truck cap doors (the door itself)
Price: each Quantity:
Topper Door - Ball Mount for Gas
Props/Lift Cylinders
(picture of actual item)
Description: Ball Mount 10 mm Ball
Steel
10 mm Ball (3/8" diameter)
Thread Length: 5/8"
Thread Diameter: approx 1/4"
no other hardware included
Price: each Quantity:
Topper Door - Ball Mount for Gas
Props/Lift Cylinders
(picture of actual item)
Description: Ball Mount 13 mm Ball
Steel
13 mm Ball (5/8" diameter)
Thread Length: 5/8"
Thread Diameter: approx 1/4"
no other hardware included
Price: each Quantity:
Leer 100XL Cap Side Gas Prop Bracket
4.3"
(picture of actual item)
Description: Leer 100XL Gas Prop Bracket (mounts to the
topper)
Steel
10 mm Ball
Length: 4.3"
no other hardware included
Price: each Quantity:
